Design
by
Clare Schmidt & Laura Jandl

The design of our course is called Trail of Wonder. First when 
you hit the ball you go through some trees or go in a secret path. 
The path has a lake on the side of it. After you go through the 
trees or path you get to a chicken. The chicken is on blocks, the 
blocks have wooden cups all around them. You have a little hole
to go in. After the chicken you have to go over some bumps. 
After the bumps you go over a bridge. On the sides of the bridge 
there are two lakes. 

After the lakes is a street. The street has frogs and a snake in 
the middle of the road. It has a tube that you can go in but if you 
can get stuck you have to go to start. After the tube there is 
little wooden cups sticking out and you tried to get in the hole.

Tried to do B
by
Laura Jandl & Clare Schmidt

We tried to make a golf course. In the golf course we tried to 
make a flag that would go up when the ball was hit into the 
hole. We tried to make it complicated so you would not be able 
to go through it. Sometimes we got frustrated so we just took 
that thing off. We tried to make a golf course by doing all our
school work so that we could work extra on our golf course.


Problems
by
Laura Jandl & Clare Schmidt 

One of the worst problems we had was when Laura and I 
disagreed with each other.  We also had to take some stuff off 
because it wouldn't work. We had to make a moving part so 
Laura and I wanted a flag that went up and down. That didn't 
work so we made a tornado and we liked it.

Solved Problems
by
Clare Schmidt & Laura Jandl

Laura and I solved the worst problem by not even using what 
we were disagreeing about. The stuff that didn't work we 
didn't use. The tornado we kept and we liked it.


Materials
by
Clare Schmidt & Laura Jandl

All you need to make a golf course is, something to sketch it 
on. A large piece of Styrofoam board to do the course on. You 
can have some materials like, Paint, cardboard. plastic tube, 
toothpicks, blocks, plaster later and stuff you mite find.


Directions
by
Clare Schmidt & Laura Jandl

First make a plan on how to get to the hole. Make a lot of 
obstacles so it's harder to get to the hole. You do not have 
to make a moving part but we did. It is a tornado. Cool huh. 
When you make the pits or the lakes you should make them 
first when you work on the foam board. Anything you find 
makes a good touch, especially frogs and lizards. When you
put on the walls and obstacles you should always put them 
on before you do everything else.

When you make the rest of your golf course you need to agree 
with your partner. You might be able to work on your own, but 
we worked together, and everybody else did too. When you are 
done with your golf course you might be able to paint it. 
We did.